1200W Stage Fog Machine 6 RGB LED Beads With Remote Control For Halloween Home Carnival Party Wedding Music Show Club Bar KTV DJ Disco

Product information: Color: Silver Material: Aluminum alloy Input voltage: AC110V/220V 50/60Hz (depending on region) Rated power: 1200W Lamp beads: 6 3-in-1 high-efficiency lamp beads Control protocol: 433 MHz Effective control distance: approximately 15 meters Control mode: wireless remote control Heating time: approximately 2-3 minutes for the first heating cycle and approximately 20 seconds for the subsequent heating cycle. Smoke spray time: approx. 25 seconds Sparkling distance: 4-5 meters Capacity: 1 L (can continue to smoke for approximately 60 minutes) Smoke spray rate: 160 m³/min Protection class: IP30 Working environment: -10°C to 45°C Applicable occasions: ballroom, KTV, party, home decoration lighting, etc. Widely used in various occasions, such as stage, wedding ceremonies, etc., to create a romantic and beautiful ambiance. Product features: 1. The machine can automatically generate smoke, so you don't need to press the remote control every time you spray smoke. 2. Smoke and colored lamp beads can be controlled separately, allowing customers to choose according to their needs. 3. The smoke spray distance is long, the smoke volume is large, and the effect is good. 4. The machine is equipped with a preheating indicator. Once preheating is complete, you can start spraying smoke. Precautions: 1. The hood must be placed in a ventilated area. Do not place it in the opening during use. Otherwise, the hood temperature will become too high and the hood may stop heating due to the temperature control fuse being interrupted. 2. The fan can be placed on the floor or installed high up, parallel to the floor but not tilted. Ensure that there is sufficient space around the fan for heat dissipation, at least 30 cm. 3. Please place this product out of the reach of children and away from flammable and explosive objects. Keep a distance of 40 cm from the fog machine to avoid burns. 4. All fog machines emit a small amount of smoke during the heating process (some even have a slight burning smell). This is normal. 5. If the following conditions occur, such as: If you experience any problems, such as smoke reduction, a loud noise from the suction pump, or no smoke is emitted, please turn off the power immediately. At the same time, check the liquid smoke inventory, fuses, cables, and power plugs. If this does not resolve the issue, please contact your dealer.